Euro half high bar calme only with later H1
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| H1 handlebars http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=12634 |
Page 1 of 1 |
| Author: | warehouse1001 [ Wed Mar 29, 2017 6:19 pm ] |
| Post subject: | H1 handlebars |
X |
|
| Author: | III [ Wed Mar 29, 2017 8:24 pm ] |
| Post subject: | Re: H1 handlebars |
KIC software confirms the same PN for all H1 Chuck. Part part number = 46003-017 Part Description = HANDLEBAR Model Count = 7 H1 N/A 500 H1 MACH III STREET H1B 72 500 H1 MACH III STREET H1C 72 500 H1 MACH III STREET H1D 73 500 H1 MACH III STREET H1E 74 500 H1 MACH III STREET H1F 75 500 H1 MACH III STREET KH500-A8 76 500 KH500 STREET |
|
| Author: | warehouse1001 [ Fri Mar 31, 2017 7:41 am ] |
| Post subject: | Re: H1 handlebars |
X |
|
| Author: | R.B. [ Fri Mar 31, 2017 9:20 pm ] |
| Post subject: | Re: H1 handlebars |
The S2 and the H1 bars are absolutely NOT the same - VERY different, the early and the later H1 bars are all technically the same other than the spacing for the knurling. Obviously there are 3 types of H1 bar : U.S. - all bikes the same (bar the knurling) Euro, low flat bars and also a "half high" bar |
|
| Author: | warehouse1001 [ Fri Mar 31, 2017 9:37 pm ] |
| Post subject: | Re: H1 handlebars |
X |
|
| Author: | husson73 [ Sat Apr 01, 2017 12:34 am ] |
| Post subject: | Re: H1 handlebars |
Euro half high bar calme only with later H1
|
|
| Author: | wavehog33 [ Sat Apr 01, 2017 7:19 am ] |
| Post subject: | Re: H1 handlebars |
I have the stock oem set from my h1D, straight and nice if you need them?? 3179972031 |
|
| Author: | warehouse1001 [ Sat Apr 01, 2017 11:57 am ] |
| Post subject: | Re: H1 handlebars |
X |
|
| Author: | 900SL [ Sun Apr 02, 2017 2:55 pm ] |
| Post subject: | Re: H1 handlebars |
warehouse1001 wrote: Just purchased and H1-C in need of a full restoration which it shall receive. The handlebars seem odd/narrow and I'm thinking they're not original even though they look similar to the later H1 bars (U.S. market) I'm familiar with. Looking in my various manuals I find the same part number (46003-017) for all H1's and the KH. Is that correct? They all had exactly the same handlebars without variation? I ran into this issue with an S2 and S2-A finding two different handlebars and part numbers. It appears that the bars changed to accommodate the addition of the master cylinder on the S2-A. Have NOS bars for both of those bikes. I guess this is what makes me skeptical about the H1 bars but then I have never restored an early bike (69-72). Looking to learn something new! Thanks guys... PS: Another triple fan tells me the S2-A bars and the H1 bars are the same even though sporting different part numbers. I can't see a difference going bike to bike and they measure the same width....??? This post is worthless without pictures  Good luck with the rebuild! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|