Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu Mar 28, 2024 4:35 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Wed Mar 08, 2017 5:39 am 

Joined: Wed Mar 01, 2017 5:45 am
Posts: 50
Location: Watton Norfolk, UK
Hi all

I have a 71 H1A, I've fitted one of those metal machined clutch release mechanisms. With new springs and the clutch lever is heavy. Are they supposed to be heavy? The cable is new and the angle on the clutch release mechanism is is the correct place, it just feels uber heavy. The plates aren't sticking together.

I have no idea how it should feel as I never had an original release mechanism or springs to relate to.

Help or I'll have a forearm like popeye.


Top
 Profile  
 
PostPosted: Wed Mar 08, 2017 9:53 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
What springs? And cable routing is very important. Did you grease the lever pivot and ball end of the cable?

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........


Top
 Profile  
 
PostPosted: Wed Mar 08, 2017 11:20 am 

Joined: Thu Jun 09, 2011 1:12 am
Posts: 238
Location: Queenborough U.K
You've probably got some heavy duty springs fitted, go back to standard .


Top
 Profile  
 
PostPosted: Wed Mar 08, 2017 12:04 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:36 am
Posts: 2691
Location: Dandridge, TN, USA
Not all "new" releases are equal....
The amount of travel per degree of rotation varies between releases as does leverage:
4 spline - .450" per 90 deg
6 spline - .430" per 90 deg
Ball Bearing - .380" per 90 deg
Aftermarket Releases:
Tony Nicosia - .410" per 90 deg
Ralf Gille- .240" per 90 deg

This video shows surprising results of Nicosia lever force:
https://www.youtube.com/watch?v=za0CVA0bu2k

The above replies are also factors.

_________________
Answers are here: http://kawatriple.com/


Top
 Profile  
 
PostPosted: Wed Mar 08, 2017 1:13 pm 
User avatar

Joined: Wed Jun 08, 2011 10:04 pm
Posts: 2223
Location: Just north of Toronto, Ontario
We did a similar test back a few years comparing the ball bearing release to Ned's hydraulic actuator.
The ball bearing had 15 lbs. and the hydraulic 12.

_________________
:wtf: :wtf: :wtf:

http://kawatriple.com/wtf/


Top
 Profile  
 
PostPosted: Wed Mar 08, 2017 8:05 pm 
User avatar

Joined: Wed Jun 08, 2011 10:23 pm
Posts: 3821
Location: Colorado Springs, CO. USA
40 years ago, 18 year old kid, knew nothing, probably bad routing, worn perch, old cable etc... clutch pull made my left arm look like popeye. Over the years, new ball bearing clutch, new cables and proper routings alleviated most of the arm pump.

_________________
This is true. Where I grew up the hills were so steep and long, when your ball rolled down the hill you just said "screw it"...


Top
 Profile  
 
PostPosted: Thu Mar 09, 2017 4:08 am 
User avatar

Joined: Thu Jun 09, 2011 3:06 am
Posts: 4364
Location: PARIS FRANCE
old cable can be an issue and explanation for heavy clutch.


Top
 Profile  
 
PostPosted: Mon Mar 13, 2017 2:58 pm 

Joined: Thu Oct 20, 2016 4:35 am
Posts: 33
Location: Londonderry NH
Hello Chris,

I just saw this thread and figured I'd help out.

5 oz. is what I came up with.
No need to thank me, just trying to be helpful! :lol: :lol:

Craig

Attachment:
IMG_2396.JPG


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Mon Mar 13, 2017 5:32 pm 

Joined: Thu Mar 31, 2016 4:31 am
Posts: 164
Location: North of Copenhagen, Denmark, Europe
:mrgreen:

_________________
Peter says:
Keep the revs up !

Bikes:
H1 Candy Red, 1970
Moto Guzzi Daytona 1000, 1992


Top
 Profile  
 
PostPosted: Sun Mar 19, 2017 8:43 am 

Joined: Wed Mar 01, 2017 5:45 am
Posts: 50
Location: Watton Norfolk, UK
Thank-you doctor I concur I to have 5 oz.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group