Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
Does pt no 11016-003 exist today? http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=12554 |
Page 2 of 2 |
Author: | 900SL [ Sat Mar 04, 2017 12:51 pm ] |
Post subject: | Re: Does pt no 11016-003 exist today? |
That's easy: Coil spring has nr. 92081-063 |
Author: | R.B. [ Sat Mar 04, 2017 2:47 pm ] |
Post subject: | Re: Does pt no 11016-003 exist today? |
YEP!!! That's the One!!!! |
Author: | R.B. [ Sat Mar 04, 2017 3:05 pm ] |
Post subject: | Re: Does pt no 11016-003 exist today? |
There you go! A video from 8 Years ago and it can clearly be seen sitting on top of the white water heater in the clock room . . .. Come on Malc . . . confess! |
Author: | Gregz [ Sat Mar 04, 2017 3:09 pm ] |
Post subject: | Re: Does pt no 11016-003 exist today? |
I think the question here is, why was your office demolished, apparently with parts inside |
Author: | Chris46 [ Sun Mar 05, 2017 4:13 am ] |
Post subject: | Re: Does pt no 11016-003 exist today? |
Hi all I've hopefully attached a picture of the cheeky scamp.Its number 32. |
Author: | R.B. [ Sun Mar 05, 2017 4:39 am ] |
Post subject: | Re: Does pt no 11016-003 exist today? |
Gregz wrote: I think the question here is, why was your office demolished, apparently with parts inside . GOOD question! . . . It shouldn't have been! When I left England in July of last Year I left with planning permission to convert my offices into a 3 bedroom bungalow. Phase 1 was to be turning the first 3 offices into a bathroom, kitchen and bedroom so that I would have somewhere to lay my hat when I popped back at Christmas. Well, Once the builders were in they said that they may as well put the infrastructure in for the entire project, the "project" then went from $50,000 to $80,000! . . . But you all know how that goes . . I went home last Christmas to a stunning little apartment but with 2 more bedrooms, a kitchen, 2 more bathrooms and a large living room as a shell - It was all looking great! However, it has only just dawned on me that a LOT of my "stuff" has gone AWOL I can only hope that my batman has boxed it all up and put it in the attic! I'm actually grateful for this post as I really didn't think where all my stuff had gone, don't get me wrong, most of it was already cleared out but there was still a lot of stuff in there and sadly, although the Intake rubber off my original '69 H1 (KAF-00184) had been on the heater for a decade so that I didn't lose it . . . . it may now be in a landfill somewhere |
Author: | demus [ Sun Mar 05, 2017 8:13 am ] |
Post subject: | Re: Does pt no 11016-003 exist today? |
R.B. wrote: . . . . it may now be in a landfill somewhere [/b] I see a price increase for those that are left… |
Author: | Stev-o [ Mon Mar 06, 2017 7:10 pm ] |
Post subject: | Re: Does pt no 11016-003 exist today? |
"Air Cleaner Muffler"...who knew?! |
Author: | R.B. [ Mon Mar 06, 2017 8:13 pm ] |
Post subject: | Re: Does pt no 11016-003 exist today? |
Stev-o wrote: "Air Cleaner Muffler"...who knew?! . The stock "wide open" airbox is VERY noisy, this was the "Euro" muffler for it - I was shocked when I rode a U.S. H1 for the first time just how noisy they were - the intake was noisier than the exhaust! ! . . . . Hence the silencing from the H1b onwards |
Author: | kawi3cyl [ Tue Mar 07, 2017 6:11 pm ] |
Post subject: | Re: Does pt no 11016-003 exist today? |
Personally I prefer to drown out any intake noise by running expansion chambers. |
Page 2 of 2 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |