Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
H1, 1970 http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=11615 |
Page 13 of 19 |
Author: | husson73 [ Mon Feb 20, 2017 2:22 pm ] |
Post subject: | Re: H1, 1970 |
On the 90s you can get Metzeler. ME 33 with soft gum which was very convenient for road use. But they stopped to make soft ME 33 at the beginning of the 21st century |
Author: | BazNSW [ Mon Feb 20, 2017 3:51 pm ] |
Post subject: | Re: H1, 1970 |
Ja-Moo wrote: BazNSW wrote: Just my 2 cents, the most impotant tyre is the front, so I've always put a race compound on the front for good grip and a touring/standard compound on the rear. I don't know about all race tires, but the Avon and Dunlop vintage racing tires require a warm up lap, and require racing speeds to get to a temp of good traction. Which is not really good on the street. Imho. I know when i was racing, I had to be judicial as the tires were a bit greasy until up to temp. My choice back then were Metzeler, Michelin or Pirelli for the track, although I did have Avons on my H1 for a while with an Avon blue dot on the front can't remember what I had on the back, they were OK from memory, might have been a Yokohama on the back. |
Author: | RODH2 [ Mon Feb 20, 2017 6:12 pm ] |
Post subject: | Re: H1, 1970 |
A bit of nostalgia for you! When I raced a H2 in the early '70's, we would run 18/20 lbs of air in the tyres, in the belief the tyres would heat up quickly, and get sticky. It worked to a degree (sorry), in that it was REAL squirrely for a couple of laps, then things were fine! I ran Yokohama and Bridgestone tyres, which was VERY unfashionable at the time, but if you did well in a race nobody came up to you and said anything about the tyres! Plenty of advice about the "rim protectors" before the race tho!! |
Author: | husson73 [ Tue Feb 21, 2017 5:09 am ] |
Post subject: | Re: H1, 1970 |
on the later 70s we got Michelin PZ2 gum on tyres which was in fact kind of racing tyres but on the Michelin catalog as road tyres . Very helpful for racing |
Author: | BazNSW [ Mon Feb 27, 2017 4:21 pm ] |
Post subject: | Re: H1, 1970 |
Nice work, the bike looks brilliant, I don't remember K81s being directional, ya learn something every day. Personally I wouldn't use the bead locks, PITA they are, so I took both out and plugged the holes, I don't think you need them for a road bike. |
Author: | 900SL [ Mon Feb 27, 2017 4:44 pm ] |
Post subject: | Re: H1, 1970 |
BazNSW wrote: Nice work, the bike looks brilliant, I don't remember K81s being directional, ya learn something every day. Personally I wouldn't use the bead locks, PITA they are, so I took both out and plugged the holes, I don't think you need them for a road bike. Thanks Baz! You're right about the bead locks, but I could not figure out how to block the holes and still have the rim to look nice |
Author: | BazNSW [ Tue Feb 28, 2017 6:17 pm ] |
Post subject: | Re: H1, 1970 |
900SL wrote: BazNSW wrote: Nice work, the bike looks brilliant, I don't remember K81s being directional, ya learn something every day. Personally I wouldn't use the bead locks, PITA they are, so I took both out and plugged the holes, I don't think you need them for a road bike. Thanks Baz! You're right about the bead locks, but I could not figure out how to block the holes and still have the rim to look nice There are rubber plugs for those holes, I bought some from this mob, there must be a place in the States that has them, your local bike shop maybe, my local didn't have any so I got them off this Ebay store. http://www.ebay.com.au/itm/PACK-2-MOTORCYCLE-WHEEL-RIM-HOLE-PLUGS-KIT-RUBBER-PLUG-OFF-ROAD-DIRT-BIKE-MX-/331537743822 |
Author: | 900SL [ Wed Mar 01, 2017 6:07 am ] |
Post subject: | Re: H1, 1970 |
BazNSW wrote: 900SL wrote: BazNSW wrote: Nice work, the bike looks brilliant, I don't remember K81s being directional, ya learn something every day. Personally I wouldn't use the bead locks, PITA they are, so I took both out and plugged the holes, I don't think you need them for a road bike. Thanks Baz! You're right about the bead locks, but I could not figure out how to block the holes and still have the rim to look nice There are rubber plugs for those holes, I bought some from this mob, there must be a place in the States that has them, your local bike shop maybe, my local didn't have any so I got them off this Ebay store. http://www.ebay.com.au/itm/PACK-2-MOTORCYCLE-WHEEL-RIM-HOLE-PLUGS-KIT-RUBBER-PLUG-OFF-ROAD-DIRT-BIKE-MX-/331537743822 Wow - thanks Baz, Much appreciated. I will order some, just to have them handy. Btw. I'm located in Northern Europe - Scandinavia. But Fleabay works everywhere, Thank God |
Author: | BazNSW [ Wed Mar 01, 2017 7:44 pm ] |
Post subject: | Re: H1, 1970 |
900SL wrote: BazNSW wrote: 900SL wrote: BazNSW wrote: Nice work, the bike looks brilliant, I don't remember K81s being directional, ya learn something every day. Personally I wouldn't use the bead locks, PITA they are, so I took both out and plugged the holes, I don't think you need them for a road bike. Thanks Baz! You're right about the bead locks, but I could not figure out how to block the holes and still have the rim to look nice There are rubber plugs for those holes, I bought some from this mob, there must be a place in the States that has them, your local bike shop maybe, my local didn't have any so I got them off this Ebay store. http://www.ebay.com.au/itm/PACK-2-MOTORCYCLE-WHEEL-RIM-HOLE-PLUGS-KIT-RUBBER-PLUG-OFF-ROAD-DIRT-BIKE-MX-/331537743822 Wow - thanks Baz, Much appreciated. I will order some, just to have them handy. Btw. I'm located in Northern Europe - Scandinavia. But Fleabay works everywhere, Thank God Sorry, just went into auto mode, you know US forum, most are American . |
Page 13 of 19 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |