Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
gage lights http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=1149 |
Page 1 of 1 |
Author: | jason8887 [ Thu Sep 22, 2011 9:05 pm ] |
Post subject: | gage lights |
I have been unsucessful in finding some of the lights that fit into the gages for a '72 h2. When I say lights, I mean the sockets and everything. Anybody have any luck using any off another year bike? If so, make/model/year? Thanks jason |
Author: | husson73 [ Fri Sep 23, 2011 3:06 am ] |
Post subject: | Re: gage lights |
where are you cause merican is sealed beam versus others countries on wich you can change the lamp. |
Author: | RODH2 [ Fri Sep 23, 2011 3:54 am ] |
Post subject: | Re: gage lights |
I think he means the Tacho/Speedo light holders, J.P. I have a few spares here, but there should be something available a bit closer!! |
Author: | husson73 [ Fri Sep 23, 2011 5:05 am ] |
Post subject: | Re: gage lights |
my mistake Rohd, easy find |
Author: | jason8887 [ Fri Sep 23, 2011 8:25 pm ] |
Post subject: | Re: gage lights |
I do in fact need the speed/tach lights. I'm puzzled that they are this difficult to get ahold of. Even the tach's and speedo's I see for sale online don't have them in them usually |
Author: | two-stroke-brit [ Sat Sep 24, 2011 6:33 pm ] |
Post subject: | Re: gage lights |
http://cgi.ebay.com/ebaymotors/Kawasaki ... 0655118222 did you see this mark |
Author: | RODH2 [ Sat Sep 24, 2011 6:43 pm ] |
Post subject: | Re: gage lights |
That is for a '74- '75, but it does look like it could be easily modded for a '72. |
Author: | jason8887 [ Mon Sep 26, 2011 8:51 pm ] |
Post subject: | Re: gage lights |
I think it could fit up without too much work. Here's to hoping! |
Author: | RODH2 [ Tue Sep 27, 2011 1:42 am ] |
Post subject: | Re: gage lights |
I'm doing my early H2 lights right now, you will be able to get there with that easily. (couple of bullet connectors) Cheers! |
Author: | jason8887 [ Sun Oct 02, 2011 8:26 pm ] |
Post subject: | Re: gage lights |
ended up putting some off a kz400 on there. fit right in the gages and worked great. wiring wasn't plug and play, but easily adapted |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |