| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| 74 Kawasaki H2 restoration...and enginr mount bolt needed!!! http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=11344 |
Page 1 of 1 |
| Author: | wavehog33 [ Wed Jan 27, 2016 9:27 pm ] |
| Post subject: | 74 Kawasaki H2 restoration...and enginr mount bolt needed!!! |
Restoring a 1974 Kawasaki H2 for the original owner. This one owner Kaw has been sitting neglected in a damp garage the last 20 years and now she is coming back to life!! Denco chambers, crank from Charlie Smith, Wisecos and ported!! So far so good but one problem. I am in need of a 8x273mm front engine mount bolt, part 92091-021. Please help, mine stripped when torqueing it down.... :thumbdown:    
|
|
| Author: | GUTS [ Wed Jan 27, 2016 9:33 pm ] |
| Post subject: | Re: 74 Kawasaki H2 restoration...and enginr mount bolt neede |
If it's the same one as the '72 and '73, I have some extras that are not Kawasaki bolts, but they are lightly chromated hardened bolts. If they will work you can have one. |
|
| Author: | wavehog33 [ Wed Jan 27, 2016 9:39 pm ] |
| Post subject: | Re: 74 Kawasaki H2 restoration...and enginr mount bolt neede |
GUTS wrote: If it's the same one as the '72 and '73, I have some extras that are not Kawasaki bolts, but they are lightly chromated hardened bolts. If they will work you can have one. It shows it as part #19 on the 72/73. The front mount is slightly different but still uses this bolt. should be a 14mm head and is 8mmx270mm in length. Thanks, does this match yours??? |
|
| Author: | GUTS [ Wed Jan 27, 2016 10:22 pm ] |
| Post subject: | Re: 74 Kawasaki H2 restoration...and enginr mount bolt neede |
Yup they are 8x270. Where do I send it to? |
|
| Author: | wavehog33 [ Wed Jan 27, 2016 10:39 pm ] |
| Post subject: | Re: 74 Kawasaki H2 restoration...and enginr mount bolt neede |
GUTS wrote: Yup they are 8x270. Where do I send it to? You the man!!! Keith Carlson 1627 Grassland Drive Brownsburg IN 46112 |
|
| Author: | GUTS [ Wed Jan 27, 2016 11:24 pm ] |
| Post subject: | Re: 74 Kawasaki H2 restoration...and enginr mount bolt neede |
I should be able to get it in the mail tomorrow. Your welcome. 
|
|
| Author: | III [ Thu Jan 28, 2016 2:56 am ] |
| Post subject: | Re: 74 Kawasaki H2 restoration...and enginr mount bolt neede |
Aint this a great place? ? ? ? |
|
| Author: | wavehog33 [ Thu Jan 28, 2016 7:59 am ] |
| Post subject: | Re: 74 Kawasaki H2 restoration...and enginr mount bolt neede |
III wrote: Aint this a great place? ? ? ?  Kawi guys are the best group!!! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|