| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Brake pedal stop?? http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=10915 |
Page 1 of 1 |
| Author: | widow-me-1 [ Mon Sep 07, 2015 1:56 am ] |
| Post subject: | Brake pedal stop?? |
Hello, can anyone tell me what the part is called or even a part number for the piece that screws into the frame, that the brake pedal hits as it returns to the up position. Is it just a bolt? I'm looking for the correct piece. The brake pedal is not shown on the Triple Parts Manual. This part is for a 72 H2. Thanks |
|
| Author: | RODH2 [ Mon Sep 07, 2015 4:11 am ] |
| Post subject: | Re: Brake pedal stop?? |
It's just a 6mmx25mm (about) bolt, that screws up from underneath with a lock-nut....can provide a p/number or pic. later, if no-one else comes in....! |
|
| Author: | mraxl [ Mon Sep 07, 2015 4:13 am ] |
| Post subject: | Re: Brake pedal stop?? |
http://kawtriple.com/mraxl/partsmanuals ... /h2abc.pdf |
|
| Author: | RODH2 [ Mon Sep 07, 2015 5:41 am ] |
| Post subject: | Re: Brake pedal stop?? |
Good guess, 6x25...... it actually goes in from underneath, and is adjusted with a lock-nut, the brake-pedal pad rests on the bolt head.... a lot of people screw it in from the top, which works O.K. but is incorrect....!  (If we just used the Resource site all the time, there would be no need for a forum!!!.... Joke, mraxl!  )
|
|
| Author: | H2RTuner [ Mon Sep 07, 2015 11:21 am ] |
| Post subject: | Re: Brake pedal stop?? |
Nice, simple local hardware store stainless steel hex head screw and nut will suffice well, but, isn't "concourse correct". |
|
| Author: | widow-me-1 [ Mon Sep 07, 2015 12:14 pm ] |
| Post subject: | Re: Brake pedal stop?? |
Thanks. Much clearer on those pages. 6x25 Hex |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|