After that stator plate cleaned up so well with Evaporust, I decided to try cleaning up this spare CDI box.
Before pics
After 2 hours soaking
Stuff sure gobbles up the rust eh?
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Evaporust for CDI boxes http://www.kawi2strokes.com/forum/viewtopic.php?f=13&t=10422 |
Page 1 of 2 |
| Author: | III [ Sun May 03, 2015 6:59 am ] |
| Post subject: | Evaporust for CDI boxes |
After that stator plate cleaned up so well with Evaporust, I decided to try cleaning up this spare CDI box. Before pics After 2 hours soaking Stuff sure gobbles up the rust eh? |
|
| Author: | GUTS [ Wed May 06, 2015 7:40 am ] |
| Post subject: | Re: Evaporust for CDI boxes |
That worked very well. 
|
|
| Author: | johns02r6 [ Wed May 06, 2015 8:33 am ] |
| Post subject: | Re: Evaporust for CDI boxes |
That worked great. Is the finish bare metal now? I get them re-zinced; it is not expensive. |
|
| Author: | III [ Wed May 06, 2015 8:44 am ] |
| Post subject: | Re: Evaporust for CDI boxes |
Seemed to retain a sort of subdued finished look John. Still retains the anodize or whatever finish it had as new. Just kind of a faded look now, mostly due to age I imagine. |
|
| Author: | kawboy [ Tue Mar 29, 2016 12:59 pm ] |
| Post subject: | Re: Evaporust for CDI boxes |
Did you soak it or cover it with paper towels? I'm going to do a stator tonight and was wondering how the cdi held up |
|
| Author: | III [ Tue Mar 29, 2016 9:05 pm ] |
| Post subject: | Re: Evaporust for CDI boxes |
I did a couple of KH400 stator plates and totally immersed them. I did the same with the CDI boxes I cleaned up. Tried to cover just enough so as to be able to hold the wires up out of the liquid. It gives the sheathing a sort of clammy feel. Not really slimy, but weird feeling. Then again, I sprayed with some contact cleaner to clean that up anyway. I did 3 boxes and the ones I did that were good to begin with, stayed fully functional. Tested all the coils on stators to be good as well. Low speed coils were already bad and have now been replaced with some of Jims excellent ones. I did get a good deal on a 5 gallon pail for 83 bucks at Amazon, with my Prime free shipping. Much better than buying 1 gallon at a time for 28-32 bucks a piece. |
|
| Author: | Dewman418 [ Wed Mar 30, 2016 12:28 am ] |
| Post subject: | Re: Evaporust for CDI boxes |
Must be expensive https://www.youtube.com/watch?v=CLaBFkeHG0A |
|
| Author: | Ja-Moo [ Wed Mar 30, 2016 2:15 am ] |
| Post subject: | Re: Evaporust for CDI boxes |
80 grand! 
|
|
| Author: | JohnnyO [ Wed Mar 30, 2016 6:10 am ] |
| Post subject: | Re: Evaporust for CDI boxes |
That's pretty darn neat  Wonder how that would work cleaning up cylinders and cases, might have to turn it down a bit  
|
|
| Author: | two-stroke-brit [ Wed Mar 30, 2016 11:52 am ] |
| Post subject: | Re: Evaporust for CDI boxes |
Can anyone explain how the laser thing works on the rust 
|
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|