Kawi2strokes.com Forum

New tanks should be coated, all metal tanks should be coated.....

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........

I just did my tank before hearing of this 'evaporust', would have liked to try it. I used shipping shrink wrap & mummified my tank. Poured in a pint of acetone with nuts & dry wall screws, rinsed with more acetone, and let dry. Used Caswell and really like this stuff. I have used Kreem and do NOT like it. Caswell is a really thick honey like substance that coats the walls, top of tank really well. Dries to a clear shiney coating. Just be careful, some leaked out of the gas cap hole on me. The H1 opening is hard to seal with a rubberband as recommended and as I have done on other tanks. You need to be quick to get it off, but it coats the entire gas tank. I used the entire amount & poured out the excess thru the petcock hole & gas cap hole.