Just curious Steve, do you know if his has the high scrambler pipes, or the standard low ones?
| Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
| Million dollar question http://www.kawi2strokes.com/forum/viewtopic.php?f=11&t=9976 |
Page 1 of 1 |
| Author: | III [ Fri Feb 13, 2015 9:18 pm ] |
| Post subject: | Million dollar question |
Some of the Canadian guys have met my friend Frank. He recently bought and is restoring a 1965 "Cross Country" (thanks Ric) YM1 305 and he is looking to find some pipes for it. Chambers ideally even though nobody makes any, or a nice used set of exhaust pipes. I know he had HVC Cycle do a total resto on the motor. Havent seen it yet but I heard it looks nice. Maybe someone knows of an RD or other early Yammy model who chambers could be adapted and may work well. Found some sweet RD pipes at the auctions too..... Thanks in advance |
|
| Author: | kawi3cyl [ Fri Feb 13, 2015 10:30 pm ] |
| Post subject: | Re: Million dollar question |
Just curious Steve, do you know if his has the high scrambler pipes, or the standard low ones?
|
|
| Author: | III [ Sat Feb 14, 2015 3:32 am ] |
| Post subject: | Re: Million dollar question |
Pretty sure he said it was not the "Scrambler" Darrin. |
|
| Author: | III [ Sat Feb 14, 2015 11:40 am ] |
| Post subject: | Re: Million dollar question |
Early Bump Anyone have any idea for pipes for a Big Bear YM1 ????? |
|
| Author: | Ric [ Sat Feb 14, 2015 12:17 pm ] |
| Post subject: | Re: Million dollar question |
A YM-1 305 is often miss identified as a Big Bear.....they are actually a Cross Country. The YDS-3 250 was a Big Bear.  28zVBOVGWhWhEw~~48_12.JPG)
|
|
| Author: | III [ Sat Feb 14, 2015 1:18 pm ] |
| Post subject: | Re: Million dollar question |
Thanks for that Ric, it wont hurt to learn more to help Frank out. I still need to know where to find some pipes. He also needs wheels but there are a lot of aftermarket rims and spokes out there on the bay... |
|
| Author: | Walms [ Mon Feb 23, 2015 10:30 am ] |
| Post subject: | Re: Million dollar question |
I'm going to try and help Frank on this but I'll need some info to get started.. Would anyone know the stock port timing on these bikes? a port rub would also be helpful. |
|
| Author: | III [ Mon Feb 23, 2015 1:46 pm ] |
| Post subject: | Re: Million dollar question |
Thanks Andrew, I just posed or should I say posted, the same request on the vintage2stroke.com forum. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|