Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Sun Nov 10, 2024 2:44 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Fri Mar 30, 2012 1:13 am 
User avatar

Joined: Wed Jun 08, 2011 10:10 pm
Posts: 1503
Location: Heber Springs, Arkansas
http://www.youtube.com/watch?v=t4S7wmxp ... ure=fvwrel

_________________
1973 RD350, 1979 RD400F, 1984 RZ350, 2014 Suzuki Vstrom 1000
CHRIS AND JEFF ARE THE MEN


Top
 Profile  
 
PostPosted: Fri Mar 30, 2012 6:31 am 
Moderator
User avatar

Joined: Thu Jun 09, 2011 6:16 am
Posts: 2147
Location: North Alabama
Smooth sounding engine.....crappy shifting.

_________________
Busy doing more riding than wrenching.......


Top
 Profile  
 
PostPosted: Fri Mar 30, 2012 11:36 am 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
Ric wrote:
Smooth sounding engine.....crappy shifting.


One missed shift, not bad. And you are right, no "girly 2 cylinder"........... :e11

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........


Top
 Profile  
 
PostPosted: Fri Mar 30, 2012 1:57 pm 
User avatar

Joined: Thu Jun 09, 2011 7:03 am
Posts: 4612
Location: Milang, South Australia
I'm heartened to know even the great K.R. can miss a shift! (At last, I have something in common with Kenny Roberts! :lol: )

_________________
"One day, your life will flash before your eyes. Make sure it's worth watching." : anon.


Top
 Profile  
 
PostPosted: Fri Mar 30, 2012 3:05 pm 
User avatar

Joined: Wed Jun 08, 2011 10:23 pm
Posts: 3841
Location: Colorado Springs, CO. USA
My H2 would pull that hard if I did not weigh 250lbs :lol:

_________________
This is true. Where I grew up the hills were so steep and long, when your ball rolled down the hill you just said "screw it"...


Top
 Profile  
 
PostPosted: Fri Mar 30, 2012 4:29 pm 
Site Admin
User avatar

Joined: Tue Jun 07, 2011 6:37 am
Posts: 10460
Location: Rio Rancho, New Mexico
BarryB wrote:
My H2 would pull that hard if I did not weigh 250lbs :lol:


And the bike lost 200 lbs, and you added 100 hp........... :lol:

_________________
Twist the throttle, tilt the horizon, and have a great time. What triples are all about...........


Top
 Profile  
 
PostPosted: Wed May 16, 2012 7:30 am 

Joined: Thu Sep 22, 2011 8:24 am
Posts: 34
note the constant hi rpm opperating range.... my kr1 is the same way from 7k - 12k+ it is a sewing machine on steroids and very nimble at 250lbs.


Top
 Profile  
 
PostPosted: Wed May 16, 2012 12:12 pm 

Joined: Thu Jun 09, 2011 11:25 am
Posts: 3156
Two missed shifts, conservative revs for that engine, and not really fast laps. Still fun, though.


Top
 Profile  
 
PostPosted: Sat Jul 28, 2012 12:53 pm 
User avatar

Joined: Sun Jul 17, 2011 4:14 pm
Posts: 161
Location: Syracuse,NY
There was zero mention as to what bike this was--- some research showed it to be an 1980 OW48R in-line 4 --56X50 bore/stroke. This was Yamaha's last effort at this aging design, it has its outer jugs reversed so the outer pipes shoot straight back- ended up worth 6hp but still not enough to compete with Suzuki's square 4.

_________________
1975 H1
1974 S1
Yamaha RZ350
...and a smelly Honda CB350-Four


Top
 Profile  
 
PostPosted: Sun Jul 29, 2012 10:20 am 

Joined: Thu Jun 09, 2011 8:34 am
Posts: 197
Location: Charlotte, NC
Charcoal wrote:
There was zero mention as to what bike this was--- some research showed it to be an 1980 OW48R in-line 4


I found that it was an OW60. Very similar bikes, though.

http://www.mcnews.com.au/features/2003/ ... _Page6.htm

_________________
YAMAHAS RULE!!!!!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group