Kawi2strokes.com Forum http://www.kawi2strokes.com/forum/ |
|
RZ 350 Gap prep complete http://www.kawi2strokes.com/forum/viewtopic.php?f=11&t=12766 |
Page 1 of 1 |
Author: | Tim Steele [ Sun May 07, 2017 8:36 pm ] |
Post subject: | RZ 350 Gap prep complete |
upload image onlinecertificity.com Wheel reinstalled. Mold grease scrubbed with 80 grit. Annual rear wheel clean up done. Test ride done |
Author: | Jim [ Sun May 07, 2017 10:21 pm ] |
Post subject: | Re: RZ 350 Gap prep complete |
There's my favorite RZ. |
Author: | Tim Steele [ Mon May 08, 2017 12:05 am ] |
Post subject: | Re: RZ 350 Gap prep complete |
Mine too my friend... |
Author: | Tim Steele [ Tue May 09, 2017 6:03 pm ] |
Post subject: | Re: RZ 350 Gap prep complete |
Took the RZ to the local Yamaha dealer to grab a set of spare plugs for the trip. Ran perfect and was well received. They took my picture and videoed my heathen 2 stroke rider departure.... |
Author: | Evans Ward [ Tue May 09, 2017 6:16 pm ] |
Post subject: | Re: RZ 350 Gap prep complete |
Wheelie upon departure Tim?? |
Author: | Jim [ Tue May 09, 2017 6:45 pm ] |
Post subject: | Re: RZ 350 Gap prep complete |
Good for you, Tim. I'm still working here, but the motorcycle work is winding down. Now I'm on to the new van trailer hitch and DT100 carrier, so I don't have to drag a trailer. |
Author: | Tim Steele [ Tue May 09, 2017 8:27 pm ] |
Post subject: | Re: RZ 350 Gap prep complete |
Parking lot was short.but yes.... |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |