Kawi2strokes.com Forum

Enthusiasts from around the world dedicated to the preservation and ritual flogging of the infamous Kawasaki 2-stroke Triples
It is currently Thu Apr 18, 2024 2:14 pm

Board index » Yamaha 2-Stroke Twins » Yamaha Chat

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 6
  [ 56 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next
  Print view Previous topic | Next topic 
Author Message
Tim Steele
 Post subject: RZ Gap Prep Begins
PostPosted: Thu Feb 18, 2016 10:12 am 
Moderator
User avatar

Joined: Wed Jun 08, 2011 5:34 pm
Posts: 2781
Location: Front Royal, VA
Today in amongst my farm chores the RZ is going on the lift for disassembly for Caswell lining the tank, and removal /disassembly of the bodywork so it can go to the painter for repaint. Installation of the new manual petcock to follow on reassembly. I took it out for a last spin yesterday and will run it up briefly today to circulate the Stabil I put in the fuel. Wheelies were pulled and fun was had, albeit cautious fun as VDOT has in their infinite wisdom spread gravel all over the paved roads here in the county for added traction in the recent snows... :wtf: :wtf:
The RD needs the Hognut Rogers newly painted oil tank installed and a new rear tire that I have yet to order, plus a good detailing and it will be ready as well. The Phoenix Project is likely taking this year off and staying home.

_________________
I Love the Smell of Blue Marble in the Morning!!!
Tim Steele in Front Royal, VA
Home of the Phoenix Project
Stay in it when it comes on the pipe, no need to be scared...
Top
 Profile  
 
Ric
 Post subject: Re: RZ Gap Prep Begins
PostPosted: Thu Feb 18, 2016 8:36 pm 
Moderator
User avatar

Joined: Thu Jun 09, 2011 6:16 am
Posts: 2146
Location: North Alabama
91 days
:wave:

_________________
Busy doing more riding than wrenching.......
Top
 Profile  
 
Tim Steele
 Post subject: Re: RZ Gap Prep Begins
PostPosted: Thu Feb 18, 2016 8:38 pm 
Moderator
User avatar

Joined: Wed Jun 08, 2011 5:34 pm
Posts: 2781
Location: Front Royal, VA
ROLL TIDE :D :D :D

_________________
I Love the Smell of Blue Marble in the Morning!!!
Tim Steele in Front Royal, VA
Home of the Phoenix Project
Stay in it when it comes on the pipe, no need to be scared...
Top
 Profile  
 
Tim Steele
 Post subject: Re: RZ Gap Prep Begins
PostPosted: Sat Feb 20, 2016 7:17 pm 
Moderator
User avatar

Joined: Wed Jun 08, 2011 5:34 pm
Posts: 2781
Location: Front Royal, VA
Made a petcock hole cover out of a handy shelf bracket and a piece of inner tube to contain the acetone rinse recommended by Caswell
Image
Ran the airline into the tank for an hour whilst I fed the Baby Mommas to dry the acetone
Image
Caswell doesn't come in cans anymore. It comes in bags that you mash and mix the two part in and then cut open the corner of the bag and squeeze the stuff into the tank
Image
Per the instructions, saran wrap and a rubber band till you get done rotating the tank. I used a rag and 2 screws to plug the petcock hole
Image
Rotated the tank every 5 minutes in every direction for an hour and then poured out the excess (which their wasn't much of)
Image
Done and done. I put a bit of anti-seize on the screws and worked them in and out a few times so they will come out when the stuff sets up.
Caswell is way thicker than Kreme or the other tank sealers I have used. All in all not a bad job. Paint work is next . I hope to have the rest of the pieces off and to the painter by next weekend 8-) 8-)

_________________
I Love the Smell of Blue Marble in the Morning!!!
Tim Steele in Front Royal, VA
Home of the Phoenix Project
Stay in it when it comes on the pipe, no need to be scared...
Top
 Profile  
 
Iron
 Post subject: Re: RZ Gap Prep Begins
PostPosted: Sun Feb 21, 2016 3:13 pm 
User avatar

Joined: Thu Jun 09, 2011 8:52 pm
Posts: 849
Location: South Louisiana
:clap: :clap: :clap:

_________________
Iron On The Bayou.
Top
 Profile  
 
Tim Steele
 Post subject: Re: RZ Gap Prep Begins
PostPosted: Mon Feb 22, 2016 12:28 pm 
Moderator
User avatar

Joined: Wed Jun 08, 2011 5:34 pm
Posts: 2781
Location: Front Royal, VA
All the bodywork has been pulled and is headed to the painter tomorrow :D :D :D

_________________
I Love the Smell of Blue Marble in the Morning!!!
Tim Steele in Front Royal, VA
Home of the Phoenix Project
Stay in it when it comes on the pipe, no need to be scared...
Top
 Profile  
 
Tim Steele
 Post subject: Re: RZ Gap Prep Begins
PostPosted: Tue Feb 23, 2016 7:49 pm 
Moderator
User avatar

Joined: Wed Jun 08, 2011 5:34 pm
Posts: 2781
Location: Front Royal, VA
My addled brain forgot a repair had to be done to the lh side cover. $6.00 for a tube of jb weld plastic weld at ballmart and Robert is your father's brother. :D :D Image

A bit of 80 grit wet or dry tri-mi and cut off a sliver of the 2 part. Knead vigorously per the easy to follow instructions. Two hours later it is hard as a (insert appropriate euphemism relating to a phallus on the wedding night here)

Image

Once my paint guy wet sands the exterior smooth and matches it to the surface, I am thinking the repair will be invisble after primer and paint.
All BS aside I am well impressed with jb weld plastic repair epoxy.

_________________
I Love the Smell of Blue Marble in the Morning!!!
Tim Steele in Front Royal, VA
Home of the Phoenix Project
Stay in it when it comes on the pipe, no need to be scared...
Top
 Profile  
 
Tim Steele
 Post subject: Re: RZ Gap Prep Begins
PostPosted: Thu Feb 25, 2016 2:21 pm 
Moderator
User avatar

Joined: Wed Jun 08, 2011 5:34 pm
Posts: 2781
Location: Front Royal, VA
Image

Today I took 30 minutes after feeding the Baby Mommas and pulled the radiator off of the RZ. Then I began the process of figuring out how I am going to mount my R-6 cooling fan.... I will be using adel clamps and securing the fan to the frame downtubes in lieu of mounting it directly to the radiator. More to follow.

_________________
I Love the Smell of Blue Marble in the Morning!!!
Tim Steele in Front Royal, VA
Home of the Phoenix Project
Stay in it when it comes on the pipe, no need to be scared...
Top
 Profile  
 
Ric
 Post subject: Re: RZ Gap Prep Begins
PostPosted: Thu Feb 25, 2016 5:35 pm 
Moderator
User avatar

Joined: Thu Jun 09, 2011 6:16 am
Posts: 2146
Location: North Alabama
You're gonna have to step it up old man.....80 days to go...... :crazy:

_________________
Busy doing more riding than wrenching.......
Top
 Profile  
 
Tim Steele
 Post subject: Re: RZ Gap Prep Begins
PostPosted: Thu Feb 25, 2016 5:51 pm 
Moderator
User avatar

Joined: Wed Jun 08, 2011 5:34 pm
Posts: 2781
Location: Front Royal, VA
Workin on it :D :D

_________________
I Love the Smell of Blue Marble in the Morning!!!
Tim Steele in Front Royal, VA
Home of the Phoenix Project
Stay in it when it comes on the pipe, no need to be scared...
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 6
  [ 56 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next

Board index » Yamaha 2-Stroke Twins » Yamaha Chat

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group